MYMM® Store AU

A registered trademark from Australia

Category

Category

Category: Computers

Showing 1–16 of 884 results

  • Sale!

    – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

     Original price was: $2,486.37.Current price is: $1,823.34.
    • Rated for 35 HP and smaller motors
    • 5.5″ setback to enhance boat stability and performance
    • 84 degrees of trim and tilt
    • Aluminum construction with stainless steel fasteners
    • Accommodates clamp-on or bolt-on motors without the need of an adapter
    Add to cart
  • Sale!

    – Phone Scanner Stand for Photo and Document scanning (Also Used as a Document Camera, Invented & Produced in The USA)

     Original price was: $60.93.Current price is: $44.68.
    • Flatbed scanners simply cannot compete with your smartphone and a Scanner Bin. Improved resolution and color rendering compared to popular flatbed scanners. Compare to 1200 DPI. Takes a fraction of the time to scan at a fraction of the cost. Not to mention that flatbed scanners end up adding a lot of hazardous e-waste to your local landfill.
    • Solve the common issues with smartphone scanning. Provides a contrasting background for consistent edge-detection and auto-cropping. Controls the lighting and provides stability and proper positioning (with multiple points of adjustment) while you scan with your smartphone. Flatten paper with the included Flatsheet.
    • Scan photographs, receipts, letters, notes, artwork, fragile documents, etc. Also used as an aid for the blind or visually impaired or as a document camera for remote learning. When you aren’t scanning, turn on its side to use as a desk-side bin to toss in the items you want to scan later.
    • Utilize the provided, high color rendering index (CRI) and very bright LED’s to provide even illumination of your scanned documents. Scanning platform is 9?? x 13??, LED??s powered via USB port (5VDC), full kit folds-up and weighs 12 ounces. Adjustable positions for device distance from scanning platform, alignment position of device, and position/angle of LED lighting.
    • Use with popular FREE APPS for document scanning like Adobe Scan, Scanbot, Evernote Scannable, CamScanner, and Prizmo Go
    Add to cart
  • Sale!

    – Phone Scanner Stand for Photo and Document scanning (Also Used as a Document Camera, Invented & Produced in The USA)

     Original price was: $60.93.Current price is: $44.68.
    • Flatbed scanners simply cannot compete with your smartphone and a Scanner Bin. Improved resolution and color rendering compared to popular flatbed scanners. Compare to 1200 DPI. Takes a fraction of the time to scan at a fraction of the cost. Not to mention that flatbed scanners end up adding a lot of hazardous e-waste to your local landfill.
    • Solve the common issues with smartphone scanning. Provides a contrasting background for consistent edge-detection and auto-cropping. Controls the lighting and provides stability and proper positioning (with multiple points of adjustment) while you scan with your smartphone. Flatten paper with the included Flatsheet.
    • Scan photographs, receipts, letters, notes, artwork, fragile documents, etc. Also used as an aid for the blind or visually impaired or as a document camera for remote learning. When you aren’t scanning, turn on its side to use as a desk-side bin to toss in the items you want to scan later.
    • Utilize the provided, high color rendering index (CRI) and very bright LED’s to provide even illumination of your scanned documents. Scanning platform is 9?? x 13??, LED??s powered via USB port (5VDC), full kit folds-up and weighs 12 ounces. Adjustable positions for device distance from scanning platform, alignment position of device, and position/angle of LED lighting.
    • Use with popular FREE APPS for document scanning like Adobe Scan, Scanbot, Evernote Scannable, CamScanner, and Prizmo Go
    Add to cart
  • Sale!

    -11.6inch HD Lcd Touch Screen+Bezel Assembly for Lenovo 300e 2nd Gen Winbook Type 81M9

     Original price was: $176.53.Current price is: $129.46.
    • Compatible Model: for Lenovo 300e 2nd Gen Winbook Type 81M9
    • Size:11.6inch; Resolution:1366*768(HD)
    • Package includes the LCD screen + touch digitizer+Bezel
    • The item is only available for the laptop with touch function. It will be well tested and packed before shipping.
    • Please kindly check your model and size again before you purchase. If you are not sure whether it is the correct item you need, please contact us with specific model and pictures of your original screen.
    Add to cart
  • Sale!

    -Replacement Touch Screen Digitizer Glass for Samsung for Galaxy Tab 3 10.1 P5210 White ?-

     Original price was: $43.88.Current price is: $32.18.
    • Screen size:10.1
    • Color:White
    • Compatible model:for Samsung for Galaxy Tab 3 10.1 P5210
    Add to cart
  • Sale!

    ! 135 Film Negative Scanner High Resolution Slide Viewer,Convert 35mm Film &Slide to Digital JPEG Save into SD Card, with Slide Mounts Feeder No Computer/Software Required.

     Original price was: $187.48.Current price is: $137.49.
    • Includes adjustable rapid slide feeder; Once you digitize them into JPG files they can be copied, moved, duplicated freely with a simple click of a mouse.
    • 5/10 Mega Pixel Stand alone Film/Slide, scan film to your SD card(up to 32GB SDHC) in 1800DPI high resolution
    • USB 2.0 interface Convert Video Cable to TV out feature: NTSC/PAL
    • Display is 2.4 inch TFT LCD screen (480×234)on the bottom, you can make the adjustment conveniently
    • Operation system: Windows XP, VISTA, 7, 8,10,Mac OS
    Add to cart
  • Sale!

    ? USB Multi Charging Cable Nylon Braided 1.2m(4ft), USB to Lighting/Type C/Micro 3 in 1 Universal Charger for All in Market Smartphones and Tablets (Black)

     Original price was: $16.48.Current price is: $12.09.
    • ?3-in-1 Design??Provide quick charge for 3 devices at the same time. ONLY 1 cable can meet your daily devices charging needs whenever you are going for a long trip, in the office, in the car or at home, which makes your life more convenient and intelligent.
    • ?Wide Compatibility: Almost Compatible with all Smartphones and Tablets.
    • ?3A Fast & Intelligent Charging: With triple-evaporator design, it enables intelligent shunt to meet the charging requirements of different interface devices.
    • ?Unrivaled durability: with High-quality Nylon Braided material, it is superior  to ordinary nylon material which with features good flexibility, bending-resistant, firm and more durable etc.
    • ?High-quality Tinned Copper Wire Core: The tinned copper wire core has strong charge transfer performance, which can speeding up the charging speed by 30%. This multi charging cable is designed for CHARGING only , CAN??T SUPPORT DATA TRANSFER.
    Add to cart
  • Sale!

    ?C XSEED Plus – Secure Bitcoin Wallet Crypto Seed Storage Steel Plates (Steel Punch Set Included) Compatible with , Ledger, Trezor Hardware Wallets

     Original price was: $148.50.Current price is: $108.90.
    • [All-round Compatibility] X-SEED PLUS offers up to 24 recovery words per sheet, for any software or hardware wallets that use the standard 12, 18 and 24 recovery words. Suitable for wallets such as Metamask, Trust Wallet, Exodus, SecuX hardware wallets, Ledger, Trezor and many more.
    • [Unhackable] Your crypto seed is backed up and stored physically offline, off the radar and out of reach from hackers and attackers on the internet.
    • [Fire-proof and water-resistant] 1.5mm extremely durable Stainless-steel sheets can resist fire and temperature as high as 2649 ??F / 1454 ??C; the engraved or stamped letters would not get damaged or washed away by water.
    • [Multiple Backup Sets] With an aluminum and 3 stainless-steel seed backups, X-SEED PLUS offers storage for up to 8 wallets/ backup sets of 12 recovery words or 4 wallets/ backup sets of 24 recovery words.
    • [Quick and Easy Setup] The industrial grade aluminum sheets only take a few minutes to engrave a full set of crypto seed; the stainless-steel sheets work best with the stamping method, and the 1.5mm thickness prevents any bending or warping.
    Add to cart
  • Sale!

    (076-1444) LCD Display Screen Adhesive Strips Tape Compatible for iMac 27″ A1419 (Late 2012- Mid 2017)

     Original price was: $29.73.Current price is: $21.80.
    • 1) Adhesive strips must be replaced every time the display is removed for repair or upgrade purposes.Removing the A1419 display on iMac requires cutting through the adhesive around the perimeter of the screen. After the adhesive is cut, it cannot be used to re-seal the display in place, so you’ll need to apply a new set of adhesive strips
    • 2) Before you start placing strips, remove all of the old adhesive. Use a spudger to scrape up an edge, then peel with your fingers.Remove all of the remaining adhesive strips from the iMac’s frame and display glass.
    • 3) A1419 LCD panel adhesive strip kit (6 pieces) replacement included
    • 4) Please heating the adhesive strip before installtaion, to make sure the adhesive tape tightly stick to the liquid crystal.press the edge of panel and let the panel lay down for a few minutes.
    • 5) Professional Operation Only??We are not responsible for any damage during teardown.
    Add to cart
  • Sale!

    (Not LCD) Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290

     Original price was: $60.47.Current price is: $44.34.
    • 1 x (Not LCD)Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290 Replacement for Samsung Galaxy Tab A 8.0 2019 SM-T290 T290
    • 1x Free Tools Kit Set ( The Tools Are Not Replaceable )You will also need other tools in order for you to be able to fix the Samsung Galaxy Tab A 8.0 2019 (Not LCD)Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290 .
    • This is not an easy job for someone who has no experience at all to replace the (Not LCD)Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290 on Samsung Galaxy Tab A 8.0 2019
    • Highly Recommended That To Use a Professional To Change Your Samsung Galaxy Tab A 8.0 2019 (Not LCD)Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290 To Minimize The Risk of Damage To Your Samsung Galaxy Tab A 8.0 2019 SM-T290 T290
    • We will not be held responsibility for any damages to this (Not LCD)Touch Digitizer Glass Screen Replacement for Samsung Galaxy Tab A 8.0 2019 Black SM-T290 T290 replacement part or your Samsung Galaxy Tab A 8.0 2019 caused by your wrong operation.
    Add to cart
  • Sale!

    [VESA Certified] DisplayPort Cable 2M, DP 1.2 Cable [4K@60Hz, 2K@165Hz 144Hz, 1080P@240Hz], Braided Video Display Port Cord 1440P High Speed Compatible for FreeSync G-Sync Gaming Monitor

     Original price was: $19.48.Current price is: $14.29.
    • ??High Resolution & Refresh-Rate ??Silkland DP to DP Cable supports 4K@60Hz, 2K@165Hz, 2K@144Hz??3D as well as uncompressed digital audio channels at 7.1, 5.1 and 2 channel audio formats.Reduces flicker to give you a really comfortable gaming experience and it also supports DP, DP++, and DisplayPort++.
    • ??Wide Compatibility??This Displayport 1.2 Cable supports Mirror Mode, Extended Mode and Gaming Mode. Connects a DisplayPort compatible PC/Laptop to a monitor or projector with DisplayPort for crystal clear audio and high definition video.Backwards compatible to Displayport 1.1/1.1a/1.0.
    • ??Work-Life Balance??Stay and work at home with ease. This Displayport 1.2 Cable supports Mirror Mode, Extended Mode and Gaming Mode. Simply plug and play. No adapter, driver, software required.
    • ??Ultra Durable Design??High-quality nylon braided jacket with 15,000+ bend lifespan allows the cable to be more flexible and lay nicely on the desktop. premium slim aluminum alloy shell and 24K gold-plated connectors gives it a stylish appearance and delivers optimal signal.
    • ??Unconditional lifetime Warranty??All costs covered during lifetime replacement process of this DisplayPort Cable. Fast and easy-to-reach support solves problems within 24h.
    Add to cart
  • Sale!

    076-1444 LCD Display Adhesive Strip Kit for Apple iMac 27″ A1419 Late 2012-Late 2015

     Original price was: $29.31.Current price is: $21.49.
    • manufacturer: Tenstep
    • Item Trademark: TENSTEP
    • Item Category: Computer
    Add to cart
  • Sale!

    10 pcs Black Standard Pen Nibs Fits for WACOM Bamboo Capture CTH-470 CTH-480 CTH-480S Tablet’s Pen

     Original price was: $39.33.Current price is: $28.84.
    • For WACOM BAMBOO: CTE, MTE, CTL, CTH; Intuos 3, Intuos 4L WACOM Bamboo Capture CTH-470
    • Including but not limited to ctl460, cth460, cth461, cth661, ctl471, cth470, cth670
    • 100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment
    • Please note that this is not manufactured by Wacom, but its high performance, meets or exceeds OEM standards
    • 10 Pcs Graphic Drawing Pad Standard Pen Nibs Stylus for Wacom Drawing Pen
    Add to cart
  • Sale!

    10MP Film Scanner, High Resolution Convert 35mm/135 Negative/Slide to Digital JPEG Save into SD Card,No PC Required

     Original price was: $496.28.Current price is: $363.94.
    • Includes adjustable rapid slide feeder; Transfer piles of films and slides quickly. The scanned images could be copied, moved, duplicated freely with a simple click of a mouse.
    • 5/10 MegaPixel Stand alone Film/Slide, Supports to digitize 35mm negative and slide as JPG files to your SD card or computer in 1800DPI high resolution.(Only support SD card up to 32GB)
    • USB 2.0 interface Convert Video Cable to TV out feature: NTSC/PAL.
    • Display is 2.4 inch TFT LCD screen (480*234)on the bottom, you can make the adjustment conveniently.
    • Operation system: Windows XP, Windows VISTA, Windows 7, Windows 8, Windows 10..
    Add to cart
  • Sale!

    10PCS 0.4mm MK8 Extruder Nozzle /3D Printer Nozzle for FDM 3D Printer Ender Series/CR-10

     Original price was: $16.48.Current price is: $12.09.
    • 10PCS 3D Printer 0.4mm Extruder Brass Nozzle Print Head for MK8 1.75mm ABS. PLA Printer
    • Nozzle: 0.4mm Input Diameter: 1.75mm Output Diameter: 0.4mm.
    • Material: Brass.
    • 0.4mm 3D Printer Extruder Nozzle Print Head.
    • 10Pcs Extruder Brass 0.4mm Nozzle For 3D Printer.
    Add to cart
  • Sale!

    11.6 inches Touch Screen Digitizer Front Glass with Bezel Frame Controller Board for HP Stream x360 11-ab030TU 1DF71PA 11-ab031tu 1HP28PA 11-ab033TU 1HP30PA (No LCD)

     Original price was: $105.00.Current price is: $77.00.
    • Free Shipping from Sydney or Melbourne by Australia Express Post. Delivery to Australia takes only 1-2 working days!
    • Size: 11.6 inches | Item Condition:Brand New, with Logo | Warranty: 6 months.
    • Compatible Model: for HP Stream x360 11-ab000 11-ab100 Convertible PC
    • Scope of supply: 1 x front touchscreen glass + frame / bezel + touch controller board | No extra back cover, inner LCD Screen, hinges, instruction or tools, etc. We recommend to the professional repair shop or an experienced person to install.
    • Before shipping, all touch screen are strictly tested for touch function and their quality will be safe! If you are not sure whether it is the correct item you need, please contact us with specific model and pictures of your original screen.
    Add to cart