A registered trademark from Australia

Sale!

ThermoPro TX-2 Fitting Rainproof Transmitter TP60S/TP65 Thermometer Humidity Monitor, Battery Included,(Accessory Only, Can NOT Be Used Alone)

Original price was: $29.98.Current price is: $21.99.

  • Universal outdoor sensor is compatible with all ThermoPro indoor outdoor thermometer hygrometer — Only compatible with TP60S/TP62/TP65; Accessory only, can not be used alone
  • With additional remote sensors, track environmental conditions in 4 locations at most; The sensor’s initial channel is channel ONE, when connecting, please ensure to slide button on the back to set Channel 1, 2 or 3
  • Place anywhere with the tabletop and wall mountable design; Requires 2 AAA batteries (Batteries included)
  • Using a 433MHZ signal, the additional remote sensor transmits temperature and humidity readings for ThermoPro indoor outdoor thermometer up to 200 feet/60m range; Temperature accuracy: ±2°F,Humidity accuracy: ±2~3%RH Temperature range: -4°F ~ 158°F (-20°C ~ 70°C); Humidity range: 10% ~ 99%
  • Temperature range: -4°F to 158°F (-20°C to 70°C); Humidity range: 10% to 99%

Specifications
1. 433 Mhz transmission frequency.
2. Transmission range up to 200 ft. (range maybe shorter based on interference present).

Package Contents:
1 x remote sensor (Transmitter).
2 x AAA size batteries(included).
1 x screwdriver (included).

NOTE:
The remote unit should NOT be placed under the direct sunlight..
sunlight will heat up the remote sensor which leads to higher temperature reading than the air temperature which is supposed to be measured.
The remote sensor must be always placed upwards so that rain won’t get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.

NOTE – Synchronize Remote Sensors
1.Position the remote sensor near the base station
2.Install batteries into transmitter and receiver
3.The RF signal icon (located on the upper left of the base station display) will flash
4.Wait for a moment or press TX button in the outdoor transmitter
5.The remote sensor temperature/humidity will appear

Reviews

There are no reviews yet.

Be the first to review “ThermoPro TX-2 Fitting Rainproof Transmitter TP60S/TP65 Thermometer Humidity Monitor, Battery Included,(Accessory Only, Can NOT Be Used Alone)”
SKU: V2M1YB270B Category: