Sale!
Australian/New Zealand to KSA/UAE/UK Plug Adaptor, AUS/China/New Zealand Plug Convert to UK/Saudi/HK Socket with 13A Fuse and Safety Shutter (1 Piece, Black)
Original price was: $13.48.$9.89Current price is: $9.89.
- ? For visitor from Australian/New Zealand travelling in KSA/UAE/UK/HK/Singapore (refer to the countries list in below specification), 3-Pin AU/NZ plug (Type I, Oblique flat blades with ground (inverted V)) fit to 3-pin UK socket
- ? Compact design, small and lightweight, 50g/piece, easily take when travelling
- ? 13A fused with safety shutter
- ? DO NOT convert the voltage and current, before use, please make sure the voltage is wide voltage (85-240VAC) or suitable in KSA/UAE/UK (220-240VAC)
- ? High quality with 18 months warranty, “DentJet” was registered on IP Australia and also enrolled on Amazon by DigitHome-AU, trademark No.: 1950064
*IMPORTANT: 24 months warranty, before use, please check the source voltage of your electric appliance is wide voltage (85-240V) or suitable to the destination voltage (220-240V)
SPECIFICATIONS:
1) Voltage: 85-240VAC
2) Current: <13A (13A fused)
3) Dimension: 35x35x65mm
4) Weight: 50g
5) Made with superior ABS anti-flaming plastics material and 100% full copper pin
6) Power consumption: <2200 watts, not suitable for high power appliances, such as hair dryer, hair straightener, coffee machine, electric iron and toothbrush
7) Source plug: 3-pin Type I Plug from China, Australia, Argentina, New Zealand, etc.
8) Destination socket: 3-pin socket from United Kingdom, Ireland, Cyprus, Malta, Malaysia, Singapore, Hong Kong, United Arab Emirates, Saudi Arabic, Brunei Darussalam, Gambia, Grenada etc.
9) Strictly quality control in the production processing and also tested before shipment,
10) Package included: converter plug
You must be logged in to post a review.
Related products
-
[6-Pack] Screen Protector Compatible with Samsung Galaxy Watch 4 40mm, [3D Curved Full Coverage], Anti-Scratch, Bubble Free, Screen Protector Replacement for Samsung Galaxy Watch 4 40mm
Original price was: $19.48.$14.29Current price is: $14.29.Add to cart- ??SCRATCH-RESISTANT?? – With strong 9H hardness level, the whole tempered glass screen protector gives your watch the best protection against drops, bumps, scratches and daily wear and tear.
- ??3D FULL COVERAGE?? – 3D heat-bending technology makes the film fits your watch seamlessly. 3D rounded edges ensure all-round protection and comfortable touch feeling.
- ??HIGH TRANSPARENCY?? – Hydrophobic and oleophobic screen coating helps blocking out fingerprints, bubbles, dust and oil, easy installation in 10 seconds.
- ??SENSITIVE TOUCH?? – The screen protector replacement for Samsung Galaxy Watch 4, is strong enough to protect but promises not to interfere with the sensitivity of your touchscreen, you will get fast response when use.
- ??WORRY-FREE Customer Service?? – We offer pre-sales and post-sales services, based on 2-year for our products. Contact us for replacement or refund at any time if you meet any problem. We will respond to you within 24 hours with solutions.
-
Car Headrest Tablet Mount, Stretchable Ipad Headrest Holder for Car Backseat Universal 360?? Rotating Adjustable, Compatible with Smartphone/Tablets/Switch/Air iPad Mini/Samsung Galaxy 4″-10.6″, Headrest Posts Width 4.7in-5.9in (Black)
Original price was: $28.48.$20.89Current price is: $20.89.Add to cart- ???Perfect Backseat Entertainment??This Car Headrest Holder Mount specially design for Car Headrest, Let your child or other Backseat passengers entertain while driving with long distances. Ideal for rear passengers watching movies, reading e-books, playing games, etc. during road trips.
- ???Wide Compatibility??This Tablet Car Headrest Mount is completely compatible with all 4″-10.6″ Tablet for iPad Air / iPad Air 2 / iPad / iPad mini 2 3 4 / iPad Pro 9.7 10.5, Kindle Fire HD, Google Nexus, Nokia Tags, eReader, Huawei Tablet PC, Nintendo Switch, ASUS Zenpad, Samsung labels, and all 4.5″-8″ Cell Phones, etc. Fits Headrest that the width between two metal posts is 4.7in-5.9in.
- ???360?? Rotation & Extensibility??The Car Headrest Tablet Mount has a Swivel ball connection for 360-degree rotation with a tilt mechanism, ideal for both portrait or landscape. Multi-angle rotation allows for a variety of different position adjustments to get the best viewing angle you want. strong & flexible arm, it can easily stretch to max 21cm, give you a perfect viewing angle for your video.
- ???Safe and Stable Protection??The Car Headrest Mount Holder Mechanical switch design can hold your tablet tightly. A soft sponge pad protects your equipment from vibration and scratches, and strengthens the friction between the two for greater grip and can withstand loose and fall, no worry at all, you can enjoy your video or movie during the driving trips.
- ???Easy Installation, No Tools Needed??This Tablet Headrest Holder specially design for Car Headrest, Easily attach and secure headrest mount on car seat without tools. Just attaches to headrest posts, Mount the headrest in seconds and transforms your tablet into a perfect in-car system.Note: The width between two metal posts on your headrest should be 12-15 cm.
-
Magnetic Phone Holder for Car, [Easily Install] ADVOXE Car Phone Holder Mount [6 Strong Magnets] Cell Phone Holder for Car [Case Friendly] iPhone Car Holder Compatible with All Smartphones & Tablets (Square Magnetic Car Phone Holder)
Original price was: $26.98.$19.79Current price is: $19.79.Add to cart- NOTE: Please put the metal plate on the phone’s back or the phone case’s back, place the iron sheet between the back of the phone/tablet and the phone/tablet case, If the back of the phone/tablet or phone/tablet case is made of glass, after wiping it clean, first stick the PE film and then the iron sheet
- ??LOCK YOUR PHONE FIRMLY?? ADVOXE Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE??1. It is recommend that use the ??square pad?? on the back of your phone/case. It is more stable than the round. 2. ANY DEVICE NEEDS TO USE THE METAL PALTE EVEN iPhone 12 and iPhone13.
- ??EASY INSTALLATION??Benefit from the special design of the clamp, this iphone car mount is quite easy to install, just need to put it on the car??s outlet blades and adjust the length of clamp by turning the knob to match the outlet. Then finish the installation.
- ??CONVINCING QUALITY & UNIVERSAL COMPATIBILITY?? ADVOXE car phone holder won SGS RoHS & SGS CP65 official certification and passed the magnetic force, telephone signal, hook stability and ingredient safety test. Quality is strictly controlled. The car holder holds most smartphones and mini tablets compatible with iPhone 13 12 11 pro max / XR / X / 8/7/6/5, Note 9 / Galaxy Note20 U, S21 S20 S10 S9 S8 S7 S6, iPad Air 2 / Mini 3 / Pro 9.7 and more.
- ??10 TIMES MORE EASIER USE THAN CLAMP HOLDER?? This magnetic phone holder for car, without any buttons, is more concise and in harmony with your car??s interior. Magnetically guided adsorption is the most ideal solution for car phone holders. You only need to take the phone close to the phone holder mount, without any complicated steps, the phone will be swiftly attracted and sticks correctly to the mount in a snap-like click. Even if you are driving intently, you can easily put your phone on it.
- ??6 MAGNETS, GET BEST STABILITY?? 6 military-grade NdFeB magnets, 100% guarantee that the phone will not fall. We screened 128 materials and 99 matrix arrangements. Finally, we designed this super strong magnetic car mount with the above material. There are many upgrades compared to the bracket of 4 ordinary magnets. Compared with the 4 magnets one, it can hold small ipads firmly in various road conditions. The closed-loop magnetic field does not affect the cell phone signal and NFC function.
- ??WHAT’S YOU GET??1*ADVOXE magnetic phone car mount, 2*Round metal Pad, 1*Rectangular metal Pad, 2*Round PE Film , 1*Rectangular PE Film. NOTE: THIS PHONE HOLDER ONLY COMPATIBLE WITH HORIZONTAL AIR VENT AND NOT COMPATIBLE WITH VERTICAL OR ROUND AIR VENT.
-
Airtags Case Compatible with Apple Airtag Keychain Keyring, Air Tag Waterproof Dog Cat Holder Pet Collar Case for Airtag Pet Tracking Device Strap Wallet Accessories
Original price was: $28.48.$20.89Current price is: $20.89.Add to cart- ??Perfect fit for Pets Collar & Backpack strap??This AirTag protective case Special designed for Pets Collar & Backpack strap , prefect fit on pets collars, backpack strap or hangbags strap.
- ??Comfortable Wearing ?? Compared with ordinary air tags protective case, it??s lightweight and stays tight with collar, no shaking at all, it’s nearly impossible for pets to feel there is one addition on their necks.This makes the pet feel very comfortable when running.
- ??Waterproof & Anti-Scratches Silicon case??Made of Study TPU protect your delicate Airtag from dust and scratch . It??s also Waterproof, you don??t have to worry about damaging your airtag if you hang it on your pet dog.
- ??No Singal Blocking Air Tag holder??Totally made by silicone,which will not affect the normal use of airtag.You don??t have to worry about finding your pet or backpack.
- ??You Will Get??You will get 2 pack silicon airtags protective case [black + white].If you have any questions or comments about the product, please contact us, we have a professional team of people to provide you with the best service and solve the problem
Reviews
There are no reviews yet.